router-vpn-speed
Dies ist eine alte Version des Dokuments!
iperf3 via TCP von Laptop zu gw02
Bitte nur Werte eintragen, bei denen sicher mindestens der Download nicht durch die Internetanbindung begrenzt ist.
Shell-Befehle:
iperf3 -R -c 10.120.0.12 -t 20 iperf3 -R -c 10.120.0.12 -P 8
Diese Werte ergeben den Downstream, der geringere Wert (sender/receiver) wird notiert. Ohne „-R“ erhält man die upstream-Messung.
TP-Link TL-WR1043NDv1, LAN, VDSL100/40
1 thread, 20 seconds down 7.99 Mbits/sec 8 threads, 10 seconds down 7.70 Mbits/sec
D-Link DIR-505, WLAN, VDSL100/40
1 thread, 20 seconds down 6.94 Mbits/sec 8 threads, 10 seconds down 6.74 Mbits/sec
TP-Link TL-WDR4900v1, LAN, VDSL100/40
1 thread, 20 seconds down 23.4 Mbits/sec 8 threads, 10 seconds down 26.2 Mbits/sec
Futro, LAN, VDSL100/40
1 thread, 20 seconds up 32.9 Mbits/sec down 75.3 Mbits/sec 8 threads, 10 seconds up 33.4 Mbits/sec down 81.9 Mbits/sec
Nanostation Loco M2, WLAN
1 thread, 20 seconds down 6.04 Mbits/sec 8 threads, 10 seconds down 7.25 Mbits/sec
WDR3600 v1.4, LAN
1 thread, 20 seconds down 13.6 Mbits/sec 8 threads, 10 seconds down 12.6 Mbits/sec
wr841nv10, LAN
1 thread, 20 seconds down 9.14 Mbits/sec up 1.04 Mbits/sec 8 threads, 10 seconds down 9.25 Mbits/sec up 949 Kbits/sec
TODO:
- WR1043v3
- WR841v10 oder v11
- Nanostation M2
router-vpn-speed.1463819845.txt.gz · Zuletzt geändert: 2016/05/21 08:37 von ludwig