bastelprojekte:freifunk-pi
Unterschiede
Hier werden die Unterschiede zwischen zwei Versionen angezeigt.
Nächste Überarbeitung | Vorhergehende ÜberarbeitungNächste ÜberarbeitungBeide Seiten der Revision | ||
bastelprojekte:freifunk-pi [2016/03/16 10:17] – First version ludwig | bastelprojekte:freifunk-pi [2016/03/20 15:21] – added sdcard clarification ludwig | ||
---|---|---|---|
Zeile 5: | Zeile 5: | ||
Please note that support is experimental and sometimes a little wonky. | Please note that support is experimental and sometimes a little wonky. | ||
- | (Networking changes sometimes required a restart for me --- // | + | === Known issues: === |
+ | |||
+ | * Networking changes sometimes required a restart for me --- // | ||
===== Compile && Install ===== | ===== Compile && Install ===== | ||
- | Compile Raspberry | + | Download the firmware |
+ | Or compile | ||
https:// | https:// | ||
Zeile 27: | Zeile 30: | ||
Zipped image files appear in the " | Zipped image files appear in the " | ||
- | Or get the latest from the ftp(soon(tm) available as of 16.3.2016). | ||
Use the sysupgrade image, and unzip && burn to sd: | Use the sysupgrade image, and unzip && burn to sd: | ||
Zeile 36: | Zeile 38: | ||
</ | </ | ||
- | The image is about 80 MB, so any SD-card will suffice. After writing to the card its recommended to expand the ext4 partition, using gparted or similar. This way the whole sdcard space will be used.(We dont want to run into not-enough-harddisk-space issues on such a big system.) | + | The image is about 80 MB, so any recent |
Put the card into the raspi, connect network to your PC, and boot. | Put the card into the raspi, connect network to your PC, and boot. | ||
Zeile 52: | Zeile 54: | ||
- | ===== Setting up wireless / Networking HowTo: ===== | + | ===== Setting up wireless / Networking HowTo ===== |
(Applies to x86/ | (Applies to x86/ | ||
Zeile 66: | Zeile 68: | ||
[ 9.991176] random: nonblocking pool is initialized | [ 9.991176] random: nonblocking pool is initialized | ||
[ | [ | ||
- | [ | + | [ |
[ | [ | ||
[ | [ | ||
Zeile 101: | Zeile 103: | ||
This is a very cheap stick, so no AP/Managed Mode and no combinations. Looks like we can only set up meshing(IBSS) here, no client network. | This is a very cheap stick, so no AP/Managed Mode and no combinations. Looks like we can only set up meshing(IBSS) here, no client network. | ||
Better devices will have more modes and 5Ghz bands(other bands will appear as devices for the network config). | Better devices will have more modes and 5Ghz bands(other bands will appear as devices for the network config). | ||
- | Complete | ||
To set up, do the following: | To set up, do the following: | ||
Zeile 153: | Zeile 154: | ||
</ | </ | ||
- | if an IBSS interface is already present, check for the correct naming (ibss_radi0). | + | if an IBSS interface is already present, check for the correct naming (ibss_radio0). |
Finally do a wifi and networking restart: | Finally do a wifi and networking restart: |
bastelprojekte/freifunk-pi.txt · Zuletzt geändert: 2016/03/20 15:22 von ludwig